Protective Clothing
Testing instruments for determination of personal protective equipment for people to wear or use for the prevention of safety hazards.
The testing instruments are applied for quality control, research and development and quality inspection for material or products according to ISO, EN, ASTM, NFPA, GB, JIS and other standards.
The testing equipment are applied for antistatic garments, firefighter suits, medical protective suits, chemical protective suits and other garments used in special environment.
Antistatic FabricsFire & Thermal ResistanceMedical ProtectiveChemical ResistanceOtherMask & Respirator
Mask&Respirator Dead Space Tester
Overview Mas&Respirator dead space tester is to determine the inhalation carbon dioxide content to measure the dead space. It is used to evaluate the respiratory usage safety and determine the use performance of personal protective…
Simulated Wearing Treatment Machine
Overview Simulated wearing treatment machine/tester is to do pretreatment for mask&respirator samples which are for other performance test. By providing certain pre-conditioning procedure for tested samples, it brings a same test conditions for sample after…
Chemical Protective Clothing Pressure Leakage Tester
Overview Chemical protective clothing pressure leakage tester also called pressure pot tester is designed to measure material specimen leakage test for chemical protective clothing materials to determine the property change after abraded or flexed. It…
Protective Clothing Flame Spread Tester
Overview ISO 15025 Protective clothing limited flame spread tester is to determine the ease of ignition and flame spread properties of industrial products in the form of single or multi-component fabrics, when subjected to a…
Protective Gloves Water Leak Tester
Overview Protective gloves water leak tester is professional designed to determine the resistance to water penetration of labtex, polychloroprene, nitrile and vinyl thin film single use gloves which to protect wearer from contamination or the…
Mask Exhalation Valve Leakage Tester
Overview Mask exhalation valve leakage tester is professional designed to measure the amount of leakage between the exhalation valve and the valve seat. By providing certain air flow according to the standard, the measured pressures….
Chemical Permeation Resistance Tester
Overview Chemical permeation resistance tester is to determine the chemical permeation of liquid test chemicals under continuous contact relative to safety clothing or safety glove material samples according to ISO 6529. The tester with temperature…
Mask Exhalation Valve Flow Conditioning Machine
Overview Mask exhalation valve expiratory flow conditioning machine is to do pretreatment for samples which are for other performance test. By providing 300L/min continuous exhalation flow over a period of 30s to tested samples, it…
Eyewear High Speed Particle Impact Test Machine
Overview This instrument is used to test the anti-high-speed particle impact performance of goggles. It is a new generation of eye protector testing instrument developed according to the relevant national standards for eye protectors and…
Medical Glove Hole Detector
Overview Glove pinhole detector is professional designed to determine the integration of latex, polychloroprene, nitrile and vinyl thin film single use gloves which to protect wearer from contamination or the harm caused by exposure to…
Mask Leaktightness Tester
Overview Mask leak tightness tester is professional degined for determining the air tightness of full mask and half mask. It is to check the pressure change inside the masks at certain time under certain pressure….
High-Low Temperature Tensile Test Machine
Overview This high-low temperature tensile tester is equipped with special high and low temperature box . With the temperature protection of sensor, high and low temperature fixtures, and sliding auxiliary, the test is completed.The high…
Filter Media Tester
Overview ISO 11057/VDI 3926 filter media tester is design for the determination of particle concentration, dust penetration, cycle time, pressure drop, residual pressure drop, fractional efficiency, gravimetric separation efficiency of filter media. The test rig…
