Direct Shear Tester
The T531 direct shear tester which is also called as direct shear apparatus is to determine the friction characteristics of geotextiles and related products in contact with a standard sand under normal stress and at a constant rate of displacement. The microprocessor-based automatic tester is driven by stepper motor, pressure regulator and analysis system.
ISO 12957.1 GB/T 17635.1 ASTM D3080 BS 1377.7 CEN-ISO/TS 7982.10
- High resolution stepper motor with reduction gear with reduced backlash.
- Easy clean carriage.
- Safe closed-loop system.
- Automatic testing and analysis system displays testing parameters and graphic curves.
|Displacement||0-300mm and 0-50mm|
|Tensile pressure sensor||0-50kN 0.1%FS|
|Vertical pressure sensor||0-100kN 0.1%FS|
|Vertical loading pressure||Up to 400kPa|
|Horizontal loading pressure||0-50kN|
|Power supply||220V 50Hz|
|Dimension|| 1500mm×800mm×1600mm |
|Net weight|| 750kg |
|2053101||Direct shear tester|
|2053102||Computer with testing software|